Before using the tanning materials out on the market today, there are a couple of things you need to know. There are a few of things you need to prepare before an application of the best self tanners. The most important thing to prepare is you skin as well as your nails.
The first thing you need to do is preparing your nails. When you apply yourself tan product you are most probably going to put it on your hands and then apply it to the areas you want tinted. By doing this the chances of your nails getting stained is very good.
This will cause dark lodges and you may even miss some areas that will cause white spots in between the darker colored areas. Some of these products contain bronzer; this means that you will see the color immediately as you apply it. Some other products do not have this kind of bronzer in it so you need to apply it and then give it some time to develop.
It might even be necessary to apply another coat after a day or two. But be sure to give the product time to develop first before applying another layer otherwise you might just end up yellow or orange. As the product develops on your skin you will become darker with time.
Exfoliate might be a new word to some people. When you exfoliate you basically remove the excess dry skin cells that were on the surface of the skin, leaving the surface of the skin smooth and clean. This is also very important that you do this before applying your product.
If you do not exfoliate before the sunless tanning product is applied the tanned color on the skin will again not last very long. Every time you shower then it will wash off these dead skin cells and you will lose the color much quicker than you would have lost it if you exfoliated before the time. Here you can clearly see how important it is to thread, wax, shave and exfoliate before applying the product.
Taking theses long term after care steps you will have the brown tanned color for so much longer. The first thing you need to remember has to do when you shower. Use a very soft face cloth when you shower and do not use body washed with any harsh ingredients or exfoliating beads in.
This will also provide some level of protection to your lips. You should also avoid any kind of deodorant or perfume before the application and even for a couple of hours after the application. Also do not use any face wash products before you apply the product as they sometimes leave some oil behind on the face. That is if you are planning to apply the product to your face.
Try and limit the amount of shaving that happens after the application. Shaving also counts as a form of exfoliation. Anything that contains salicylic acid as well as benzoyl peroxide should also be avoided. These are corrosive agents and can cause the tan to fade very quickly. By using the best self-tanner you will get the best results.
The first thing you need to do is preparing your nails. When you apply yourself tan product you are most probably going to put it on your hands and then apply it to the areas you want tinted. By doing this the chances of your nails getting stained is very good.
This will cause dark lodges and you may even miss some areas that will cause white spots in between the darker colored areas. Some of these products contain bronzer; this means that you will see the color immediately as you apply it. Some other products do not have this kind of bronzer in it so you need to apply it and then give it some time to develop.
It might even be necessary to apply another coat after a day or two. But be sure to give the product time to develop first before applying another layer otherwise you might just end up yellow or orange. As the product develops on your skin you will become darker with time.
Exfoliate might be a new word to some people. When you exfoliate you basically remove the excess dry skin cells that were on the surface of the skin, leaving the surface of the skin smooth and clean. This is also very important that you do this before applying your product.
If you do not exfoliate before the sunless tanning product is applied the tanned color on the skin will again not last very long. Every time you shower then it will wash off these dead skin cells and you will lose the color much quicker than you would have lost it if you exfoliated before the time. Here you can clearly see how important it is to thread, wax, shave and exfoliate before applying the product.
Taking theses long term after care steps you will have the brown tanned color for so much longer. The first thing you need to remember has to do when you shower. Use a very soft face cloth when you shower and do not use body washed with any harsh ingredients or exfoliating beads in.
This will also provide some level of protection to your lips. You should also avoid any kind of deodorant or perfume before the application and even for a couple of hours after the application. Also do not use any face wash products before you apply the product as they sometimes leave some oil behind on the face. That is if you are planning to apply the product to your face.
Try and limit the amount of shaving that happens after the application. Shaving also counts as a form of exfoliation. Anything that contains salicylic acid as well as benzoyl peroxide should also be avoided. These are corrosive agents and can cause the tan to fade very quickly. By using the best self-tanner you will get the best results.
About the Author:
If you are hunting for information about the best self tanners, check out the web pages online here today. You can see details on how long do spray tans last right now.
No comments:
Post a Comment