Athletes or people who have a severe case of flat feet would usually wear some custom made insoles with an arch support in order to be able to make up for their flat arch. Now although usually these special types of insoles are made by professional manufacturers, they can actually be made at home. One can make handmade orthotics if his case is not very severe like if he just has a low arch.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one notices that the arch support is not high enough, then he may actually add another layer if he would want to. All he has to do is get another insole and just repeat the process that was done a while ago. After that, he just has to wait for the glue to dry again and try it on.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one notices that the arch support is not high enough, then he may actually add another layer if he would want to. All he has to do is get another insole and just repeat the process that was done a while ago. After that, he just has to wait for the glue to dry again and try it on.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
No comments:
Post a Comment